Sewage Treatment Plant (STP)
Sewage treatment is the process of removing contaminants from domestic and municipal wastewater, containing mainly household sewage plus some industrial wastewater.
The waste water from residential/commercial complexes are unstable poly dispense system. These can have coarse and fine particles along with high COD and BOD. Sewage treatment (STP Plant) refers to the process of removing contaminants, micro-organisms & other type of pollutants from household sewage. Sewage waste is generated in high amount which is polluting many water bodies. Our latest technology based STP system not only purify liquid waste but also produce chemical free sludge which can be used as manure in horticulture. The main purpose of a sewage treatment system is to remove waste water from points of origin to a treatment facility or place of disposal. When you look to set up a sewage water treatment plant so I think you need to know that a sewage water treatment plant is performed physically as well as biological process and sometimes it also performs chemical processes to remove pollutants from water.
Products & Services
Sewerage treatment falls into 2 categories namely
Destructive methodology - In this technology, pollutants are decomposed into gases and precipitants by oxidation or reduction and these are then separated from water. The treatment consists of steps like biological treatment on aeration tanks, aeration filters, and filtrate beds. This method, if required can include chemical treatment also.
Regenerative method – In this case, other sewerage steps are common but there is additional equipment to retrieve any valuable chemical for example phenol, acetic acid etc. which may fetch some price in the market.
The treatment methods incorporated are Clarifiers , Bar screen , equalization tanks , Activated sludge process and LATEST Membrane bio reactor [MBR] technology.
MBR technology efficiently overcomes the problem associated with poor settling of sludge in conventional activated sludge process.
MBR membranes enable to maintain high MLSS/Biomass in bioreactor chamber upto 10,000 mg/L. As a result, system becomes highly efficient in removing COD & BOD.
At high MLSS, adequate retention time degrades the maximum organics, resulting in less sludge generation.
Considering the infeed characteristics and outlet parameters, the volume of tank is also reduced considerably thereby, saving space and construction cost.
Operation cost is also economical in comparison to conventional biological system.
MBR Technology eliminate the operation of settling unit, sand bed filter, activated carbon filter and produce consistent high quality ultra filtered water.
The MBR unit is fully automatic in operation through PLC and transmitter control for working / backwash and CEB of membranes.
Advantages of STP
Amount of household waste that is released into the environment can be reduced thus improving environment's health
Installation of STP in apartments/flats will upgrade the quality of life
Ground water quality can be improved as there will be no sewage waste
Chemical free sludge is generated which can be used as manure.
Portable Sewerage Treatment Plant
It is small unit designed and manufactured by Hyper Filteration. It is a process, wherein the contaminants are removed from wastewater as well as household sewage, to produce waste stream or solid waste suitable for discharge or reuse.
Salient Features of Portable STP
How HYPER helped?
Hyper Introduced Portable STP's which is a ready to install STP Plant, with a really easy to install version of the full Treatment Plant, wit produces highly filtered water, that can be either discharged or utilized for drinking and distribution.
